Battery Charger
Showing all 18 results
-
Battery ChargerShort Length Ring Terminal Kit for PL4020 (for use with PLA62 only)
Allows for ring terminal connection to the battery/vehicle when using the PLA62 extension cord with the PL4020.
- For use with PLA62 charging extension cable only.
- Not for direct connection to the output leads on any single channel of the PL4020.
(0 reviews) -
Battery ChargerShort Length Clamp Set for PL4020 (for use with PLA62 only)
Allows for clamp connection to the battery/vehicle when using the PLA62 extension cord with the PL4020.
- For use with PLA62 charging extension cable only.
- Not for direct connection to the output leads on any single channel of the PL4020.
(0 reviews) -
Battery Charger10′ Extension Cable for PL4020
Designed for use with the PLA63 short clamp set or the PLA64 short ring terminal kit.
(0 reviews) -
Battery ChargerReplacement Standard Length Clamp Set for PL4020
Four (4) PLA61 come with every PL4020 ? this item is order as a replacment to those included clamp sets.
(0 reviews) -
Battery Charger12V Adapter Output Accessory for PL2140
Replacement 12V output connector for PL2140.
(0 reviews) -
Battery ChargerReplacement Ring Kit for PL2140
Replacement/additional ring terminal output kit for PL2140.
(0 reviews) -
-
Battery Charger12V 100A Flashing Power Supply and 100A HD Battery Charger
- 0-100A (on demand) power supply mode to maintain system voltage
- Extra-long 13′ cable reach
- PowerJaw clamps provide improved access to hard-to-reach batteries
- PowerJaw clamps allow the hood to be closed (most vehicles) during ADAS calibration
- Requires 20A service
- Power supply mode provides optimal support for vehicle reprogramming and ADAS recalibration
- Power supply mode has minimal voltage ripple (<100mV)
- Power supply mode features Rapid Load Response (RLR) technology
- 100/40/10A charging modes allow quick, efficient charging of all battery sizes
- Properly charges Flooded, AGM, Spiral Wound, Deep Cycle and Marine Batteries
- Forced start mode allows charging of totally dead batteries
- Battery repair mode overcomes battery sulfation to restore reserve capacity
- Reverse polarity protection and battery fault detection
(0 reviews) -
Battery Charger12V 100A Flashing Power Supply and 60A Battery Charger
- 0-100A (on demand) power supply mode to maintain system voltage
- Extra-long 13′ cable reach
- PowerJaw clamps provide improved access to hard-to-reach batteries
- PowerJaw clamps allow the hood to be closed (most vehicles) during ADAS calibration
- Requires 20A service
- Power supply mode provides optimal support for vehicle reprogramming and ADAS calibration
- Power supply mode has minimal voltage ripple (<100mV)
- Power supply mode features Rapid Load Response (RLR) technology
- 60/40/10A charging modes allow quick, efficient charging of all battery sizes
- Properly charges Flooded, AGM, Spiral Wound, Deep Cycle and Marine Batteries
- Forced start mode allows charging of totally dead batteries
- Battery repair mode overcomes battery sulfation to restore reserve capacity
- Reverse polarity protection and battery fault detection
(0 reviews) -
Battery Charger12V 4x5A SOLAR PRO-LOGIX 4-Bank Battery Maintenance Station
- 6/12 Volt Charging and Maintaining
- Small footprint and mountable design
- Includes (4) clamp output leads
- 10 ft ext cord (PLA62) and accessories available
- 1 Year Limited Warranty
- 3 channels ? 12V output
- 1 channel ? 6/12V output
- 4 x 5A output
- 4 independent channels
- Fully automatic, multi-phase process
- Enhanced maintenance mode
- Charges multiple lead acid battery types
- Temperature compensation
(0 reviews) -
Battery Charger12V 4x2A SOLAR PRO-LOGIX 4-Bank Battery Maintenance Station
Model PL4020 combines automatic operation with the ability to properly charge multiple battery types. Advanced charging logic, robust components, and smart display feedback mean effective and efficient charging for your operation.
- 12 Volt Charging and Maintaining
- 10 ft ext cord (PLA62) and accessories available
- 1 Year Limited Warranty
- 4 x 2A output
- 4 independent channels
- Fully automatic, multi-phase process
- Enhanced maintenance mode
- Charges multiple lead acid battery types
- Temperature compensation
- Small footprint and mountable design
- Includes (4) clamp output leads
(0 reviews) -
Battery Charger60A 12/24V Wheel Charger with Start
- 12/24 Volt charging and maintaining
- 250A 12V Engine Starting Assistance Mode
- Easy-to-follow, data rich display
- 2 Year Limited Warranty
- 6040/40/10A 12V charging rates
- 20/10A 24V charging rates
- Fully automatic, multi-phase charging process
- Charges multiple lead acid battery types
- Forced start allows charging of totally dead batteries
- Temperature compensation for beneficial charging
- 0-60A 12V Stable Power Mode; 13.1-14.9V range
- 0-20A 24V Stable Power Mode; 26.2-29.8V range
(0 reviews) -
Battery Charger20/10/2 Amp 12V Intelligent Battery Charger / Maintainer with Start Assistance
- 12 Volt battery charging
- Enhanced maintenance mode for ideal long term storage
- Temperature compensation for more effective charging
- Reverse Polarity Protection and Battery Fault Detection
- Data rich display provides detailed feedback during charging
- 12 Volt engine starting assistance
- 20/10/2A charge rates
- 20A fast charge rate is ideal for charging large batteries
- Fully automatic operation
- Advanced multi-phase charging process
- Properly charges all lead acid battery types
- Soft Start Mode for severely depleted batteries
- Recondition Mode rejuvenates distressed batteries
(0 reviews) -
Battery Charger10A 12/24V SOLAR PRO-LOGIX Battery Charger
Combining fully automatic operation and the ability to properly charge multiple battery types, the PRO-LOGIX PL2410 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician.
- 12 and 24 Volt battery charging
- Reverse Polarity Protection
- Battery Fault Detection
- Data rich display
- 10/6/2A charge rates
- Fully automatic operation
- Advanced multi-phase charging process
- Properly charges all battery types
- Soft Start Mode for severely depleted batteries
- Recondition Mode rejuvenates distressed batteries
- Enhanced maintenance mode
- Temperature compensation for effective charging
(0 reviews) -
Battery Charger20A 6/12V PRO-LOGIX Battery Charger
Combining fully automatic operation and the ability to properly charge multiple battery types, the PRO-LOGIX PL2320 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician.
- 6 and 12 Volt battery charging
- Reverse Polarity Protection
- Battery Fault Detection
- Data rich display
- 20/10/2A charge rates
- Fully automatic operation
- Advanced multi-phase charging process
- Properly charges all battery types
- Soft Start Mode for severely depleted batteries
- Recondition Mode rejuvenates distressed batteries
- Enhanced maintenance mode
- Temperature compensation for effective charging
(0 reviews) -
Battery Charger10A 6/12V PRO-LOGIX Battery Charger
Combining fully automatic operation and the ability to properly charge multiple battery types, the PRO-LOGIX PL2310 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician.
- 6 and 12 Volt battery charging
- Reverse Polarity Protection
- Battery Fault Detection
- Data rich display
- 10/6/2A charge rates
- Fully automatic operation
- Advanced multi-phase charging process
- Properly charges all battery types
- Soft Start Mode for severely depleted batteries
- Recondition Mode rejuvenates distressed batteries
- Enhanced maintenance mode
- Temperature compensation for effective charging
(0 reviews) -
Battery Charger6/12V 4.0A SOLAR PRO-LOGIX Battery Maintainer
Combining fully automatic operation and the ability to properly charge multiple battery types, the PRO-LOGIX PL2140 is the perfect battery maintainer to manage all of the batteries in your life. Intelligent, beneficial, safe and versatile.
- 6 and 12 Volt battery charging
- Recovery Mode overcomes power outages
- Reverse Polarity Protection
- Battery Fault Detection
- Includes clamp set, ring kit and 12V plug outputs.
- 4 amp charge rate
- Fully automatic operation
- Advanced multi-phase charging process
- Properly charges all battery types
- Soft Start Mode for severely depleted batteries
- Recondition Mode rejuvenates distressed batteries
- Enhanced maintenance mode for extended storage
- Temperature compensation
(0 reviews) -
Battery Charger1.5 Amp 12 Volt Automatic Underhood Battery Charger
With on-board charging and automatic operation, the Solar 1002 combines supreme convenience and reliable charging power in a lightweight, compact design. Perfect for keeping seasonal use batteries in top condition.
- 12 Volt operation
- 1.5 Amp charge rate
- Automatic operation
- Underhood charging
- Battery attachment kit included
- Weather resistant plastic case
- Meets new efficiency requirements
- 1 Year Limited Warranty
(0 reviews)